Theses and Publications

Siliter hats and swords on a white tablecloth for doctoral promotion

 

 

PhD Theses

Mikkonen, R. 2022, Studies of Low Surface Energy Materials for Printed Electronics Applications, Tampere University, Tampere University Dissertations 626. Mikkonen´s thesis webpage

Li, M. 2022, Printed and Coated, Thin-Film Organic and Metal Oxide Diodes and Rectifier Circuits for RF Energy Harvesting, Tampere University, Tampere University Dissertations 575. Li´s thesis webpage

Bhalerao, S. 2021, Flexible, Low-Voltage, Metal Oxide Thin Film Transistors (TFT) and Circuits for Wearables and Internet of Things (IoT), Tampere University. Tampere University Dissertations 529. Bhalerao’s thesis webpage

Arvani, M. 2021, Materials and Devices for Energy Autonomous Distributed Electronics, doctoral thesis in cooperation with Åbo Akademi University, Arvani´s thesis webpage

Vuorinen, T. 2020, Development of Printed Conformable Sensors. Tampere University. Tampere University Dissertations 348. Vuorinen’s thesis webpage

Mosallaei, M. 2020, Improving the Electrical Performance of Printed Stretchable Interconnects by Local Modification of Stiffness. Tampere University. Tampere University Dissertations 341. Mossallaei’s thesis webpage

Laurila, M.-M. 2019, High-Precision Digital Printing Processes for Electronics Fabrication. Tampere University. Tampere University Dissertations 117. Laurila’s thesis webpage

Keskinen, J. 2018, Supercapacitors on Flexible Substrates for Energy Autonomous Electronics. Tampere University of Technology. Publication, vol. 1562, Tampere University of Technology. Keskinen’s thesis webpage

Khorramdel, B. 2018, Additive and Digital Fabrication of 3D Interconnects in MEMS Packaging Using Printing Technologies. Tampere University of Technology. Publication, vol. 1553, Tampere University of Technology. Khorramdel’s thesis webpage

Lehtimäki, S. 2017, Printed Supercapacitors for Energy Harvesting Applications. Tampere University of Technology. Publication, vol. 1463, Tampere University of Technology. Lehtimäki’s thesis webpage

Janka, M. 2015, Self-Aligned Patterning Methods for Large-Area Electronics. Tampere University of Technology. Publication, vol. 1341, Tampere University of Technology. Janka’s thesis webpage

Niittynen, J. 2015, Comparison of Sintering Methods and Conductive Adhesives for Interconnections in Inkjet-Printed Flexible Electronics. Tampere University of Technology. Publication, vol. 1291, Tampere University of Technology. Niittynen’s thesis webpage

Heljo, P. 2014, Organic Diodes for High frequency and Logic Applications. Tampere University of Technology. Publication, vol. 1264, Tampere University of Technology. Heljo’s thesis webpage

Halonen, E. 2013, Integration of Inkjet-Printing and Processing into manufacturing for Flexible electronics. Tampere University of Technology. Publication, vol. 1179, Tampere University of Technology.

Lilja, K. 2011, Performance, interfacial properties and applications of printed organic diodes. Tampere University of Technology. Publication, vol. 1006, Tampere University of Technology. Lilja’s thesis webpage

Pekkanen, V. 2011, Characteristics of inkjet Material deposition for Microelectronics Packaging. Tampere University of Technology. Publication, vol. 959 Tampere University of Technology. Pekkanen’s thesis webpage

 

Journal Articles 2014 – 2022

Complete lists of publication from Prof. Matti Mäntysalo and Prof. Donald Lupo can be found from their Google Scholar profiles.

Prof. Matti Mäntysalo’s Google Scholar profile

Prof. Donald Lupo’s Google Scholar profile

 

Journal articles 2022 – 2020

Journal articles 2019 – 2018

Journal articles 2017 – 2016

Journal articles 2015 – 2014

 

Articles in Conference Publications 2014 – 2022

 

Conference Publications 2022 – 2020

Conference Publications 2019 – 2018

Conference Publications 2017 – 2016

Conference Publications 2015 – 2014