2024
Fu, Z. et al., Cyclic Bending Reliability and Failure Mechanisms of Printed Flexible Supercapacitors, 2024 IEEE International Flexible Electronics Technology Conference (IFETC), 2024, doi: 10.1109/IFETC61155.2024.10786755. Fu’s article webpage
Kajas, N. et al., Fabricating ultrathin piezoelectric sensors in ambient conditions with low operation voltage, 2024 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2024, doi: 10.1109/FLEPS61194.2024.10603511. Kajas´ article webpage
Mevada, C. et al., Dopamine functionalized activated carbon-based 3D printed biodegradable electrode for supercapacitors, 2024 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2024, doi: 10.1109/FLEPS61194.2024.10603684. Mevada´s article webpage
Punkari, T. et al., Monolithic supercapacitors prepared by roll-to-roll screen printing, 2024 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2024, doi: 10.1109/FLEPS61194.2024.10603726. Punkari´s article webpage
Merhi, B. et al., THz Spectroscopy Analysis of Crystallinity Optimization for Enhanced Piezoelectricity in Biodegradable Poly-L-Lactide Acid, 2024 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2024, doi: 10.1109/FLEPS61194.2024.10604083. Merhi´s article webpage
2023
Laurila, M.-M. et al., Thermal Stability of a Fully Printed Ultra-Thin Organic Pre-Amplifier Circuit Meant for on-Skin applications, 2023 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2023, doi: 10.1109/FLEPS57599.2023.10220378. Laurila´s article webpage
Howard, E. et al., Integration of Supercapacitors to Trigger In-Situ Electropolymerization for Irreversible Visual Indicators, 2023 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2023, doi: 10.1109/FLEPS57599.2023.10220370. Howard´s article webpage
Kujansuu, A. et al., Thermal Stability of a Fully Printed Ultra-Thin Organic Pre-Amplifier Circuit Meant for on-Skin applications, 2023 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2023, doi: 10.1109/FLEPS57599.2023.10220378. Kujansuu´s article webpage
Kanko, N. et al., Evaluation of Expandable Microsphere Pressure Sensor for Arterial Pulse Wave Measurements, 2023 IEEE SENSORS, 2023, doi: 10.1109/SENSORS56945.2023.10324938. Kanko´s article webpage
2022
Pourkheirollah, H. et al., A Modified Exponential Equivalent Parallel Resistance (EPR) Model for Predicting Self-Discharge Behavior of Printed Flexible Supercapacitors, 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC), 2022, pp. 264-268, doi: 10.1109/ESTC55720.2022.9939466. Pourkheirollah´s article webpage
Fu, Z. et al., Assessment of a Cyclic Bending Test Method for Printed Flexible Supercapacitor, FLEPS 2022 – IEEE International Conference on Flexible and Printable Sensors and Systems, 2022, pp. 1-4, doi:10.1109/FLEPS53764.2022.9781495. Fu´s article webpage
2021
Montero, K.L., Laurila, M. -M. and Mäntysalo, M. Fully Printed Unobtrusive and Skin-conformable Piezoelectric Energy Harvester, 2021 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2021, pp. 1-4, doi: 10.1109/FLEPS51544.2021.9469861. Montero’s article webpage
2020
Montero, K.L., Laurila, M. -M. and Mäntysalo, M. All Printed Flexible Piezoelectric Pressure Sensor with Interdigitated Electrodes, 2020 IEEE 8th Electronics System-Integration Technology Conference (ESTC), 2020, pp. 1-6, doi: 10.1109/ESTC48849.2020.9229777. Montero’s article webpage
Mikkonen, R. and Mäntysalo, M., Inkjettable, polydimethylsiloxane based soft electronics, 2020 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), 2020, pp. 1-3, doi: 10.1109/FLEPS49123.2020.9239558. Mikkonen’s article webpage
M. Rohaim, et al., Design of Thin, High Permittivity, Multiband, Monopole-Like Antennas, 2020 IEEE 19th Biennial Conference on Electromagnetic Field Computation (CEFC), 2020, pp. 1-4, doi: 10.1109/CEFC46938.2020.9451492. Rohaim’s article webpage
M. Arvani et al., Flexible Energy Supply for Distributed Electronics Powered by Organic Solar Cell and Printed Supercapacitor, 2020 IEEE 20th International Conference on Nanotechnology (IEEE-NANO), Montreal, QC, Canada, 2020, pp. 257-262, doi: 10.1109/NANO47656.2020.9183493. Arvani’s Article webpage
Hakola, L. et al., Sustainable materials and processes for electronics, photonics and diagnostics, Electronics Goes Green 2020+, Berlin, Germany, September 1. 2020, ISBN 978-3-8396-1659-8 Proceedings, pp. 45-52. Sustainable_materials_and_processes_2020 (pdf)