2017
Mashayekhi, M. et al., Chip-by-chip configurable interconnection using digital printing techniques, Journal of Micromechanics and Microengineering, 2017, 27, 4, 045009. Mashayekhi’s article webpage
Rinne, J. et al., Viability Bounds of M2M Communication using Energy-Harvesting and Passive Wake-up Radio, IEEE Access, 2017, vol. 5, pp. 27868-27878. Rinne’s article webpage
Khorramdel, B., Torkkeli, A. & Mäntysalo, M., Electrical Contacts in SOI MEMS Using Aerosol Jet Printing, IEEE Journal of the Electron Devices Society, 2017, vol. 6, pp. 34-40. Khorramdel’s article webpage
Railanmaa, A., Lehtimäki, S. & Lupo, D., Comparison of starch and gelatin hydrogels for non-toxic supercapacitor electrolytes, Appl. Phys. A. 2017, 123, No. 6, 459. Railanmaa’s article webpage
Jeyhani, V. et al., Comparison of Simple Algorithms for Estimating Respiration Rate from Electrical Impedance Pneumography Signals in Wearable Devices, Health and Technology, 2017, Vol. 7, No.1, p. 21-31 11 p. Jeyhani’s article webpage
Tehrani, Z. et al., Large-area printed supercapacitor technology for low-cost domestic green energy storage, Energy, 2017, Vol. 118, p. 1313-1321. Tehrani’s article webpage
Rinne, J. et al., Feasibility and Fundamental Limits of Energy-Harvesting Based M2M Communications, International Journal of Wireless Information Networks, 2017, Vol. 24, No. 3, p. 291–299. Rinne’s article webpage
Lehtimäki, S. et al., Performance, stability and operation voltage optimization of screen-printed aqueous supercapacitors, Scientific Reports, 2017,Vol. 7, 46001. Lehtimäki’s article webpage
Kraft, T., Berger, P. & Lupo, D., Printed and organic diodes: devices, circuits and applications, Flexible and Printed Electronics, 2017, Vol. 2, No.3, 033001. Kraft’s article webpage
Laurila, M.-M., Khorramdel, B., Mäntysalo, M., Combination of E-jet and inkjet printing for additive fabrication of multilayer high-density RDL of silicon interposer, IEEE Transactions on Electron Devices, 2017, Vol. 64, No. 3, p. 1217-1224. Laurila’s article webpage
Khorramdel, B., Kraft, T. M., & Mäntysalo, M., Inkjet printed metallic micropillars for bare die flip-chip bonding, Flexible and Printed Electronics, 2017, 2(4), 045005. Khorramdel’s article webpage
Khorramdel, B. et al., Inkjet printing technology for increasing the I/O density of 3D TSV interposers, Microsystems & Nanoengineering, 2017, Vol. 3, p. 17002. Khorramdel’s article webpage
Laurila, M.-M. et al., Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size, Journal of Micromechanics and Microengineering, 2017, Vol. 27, No. 9, 095005. Laurila’s article webpage
Putaala, J. et al., Capability assessment of inkjet printing for reliable RFID applications, IEEE Transactions on Device and Materials Reliability, 2017, Vol. 17, No. 2, p. 281-290. Putaala’s article webpage
2016
Keskinen, J. et al., Architectural Modifications for Flexible Supercapacitor Performance Optimization, Electronic Materials Letters, 2016, Vol. 12, No. 6, p. 795–803. Keskinen’s article webpage
Tuukkanen, S. et al., Behaviour of one-step spray-coated carbon nanotube supercapacitor in ambient light harvester circuit with printed organic solar cell and electrochromic display, Scientific Reports, 2016, Vol. 6, 22967. Tuukkanen’s article webpage
Schramm, A. et al., Electrical switching of photoluminescence of single site-controlled InAs quantum dots, Electronics Letters, 2016, Vol. 52, No. 14, p. 1240-1242. Schramm’s article webpage
Mashayekhi, M. et al., Evaluation of Aerosol, Superfine Inkjet, and Photolithography Printing Techniques for Metallization of Application Specific Printed Electronic Circuits, IEEE Transactions on Electron Devices, 2016, Vol. 63, No. 3, p. 1246-1253. Mashayekhi’s article webpage
Khorramdel, B. & Mäntysalo, M., Fabrication and electrical characterization of partially metallized vias fabricated by inkjet, Journal of Micromechanics and Microengineering, 2016, 26, 4, 045017. Khorramdel’s article webpage
Vuorinen, T. et al., Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate, Scientific Reports, 2016, Vol. 6, 35289. Vuorinen’s article webpage
Arvani, M. et al., Photoinduced hole transfer in QD–phthalocyanine hybrids, Physical Chemistry Chemical Physics, 2016, Vol. 18, No. 39, p. 27414-27421. Arvani’s article webpage
Suikkola, J. et al., Screen-Printing Fabrication and Characterization of Stretchable Electronics, Scientific Reports, 2016, Vol. 6, 25784. Suikkola’s article webpage
Myllymäki, S. et al., RF measurements to pinpoint defects in inkjet-printed, thermally and mechanically stressed coplanar waveguides, Microelectronics Reliability, 2016, Vol. 65, p. 142-150. Myllymäki’s article webpage