Theses

Modeling Early-age Drying and Moisture Transfer in Concrete for Practical Applications in Nordic Climates

Sekki, P. (2025)

Hygrothermal Modelling of Sorption-Effects in Vapour Permeable Wood-Based Materials

Huttunen, P. (2025)

Various Factors of Pressure-Driven Entry of Soil Gas into a Detached House Through Concrete Foundation: Measurements, Statistical Analysis and Crawl Space Modelling

Keskikuru, T. (2018)

Energy Saving Potential and Interior Temperatures of Glazed Spaces: Evaluation through Measurements and Simulations

Hilliaho, K. (2017)

Karjala, P. (2026)

Kortetmaa, J. (2026)

Haapaniemi, S. (2026)

Evaluation of the building physic performance of a false plinth repair method

Kemppi, J. (2025)

Control of indoor and outdoor conditions in building physical research equipment for wall structures. Validation of cyclic temperature control and pressure difference control

Järvinen, T. (2025)

Brick-clad wood-framed exterior walls' function in cooled buildings in current and future climate

Hyötyläinen, M. (2025)

Building Physics of Ventilated Attics in Field Tests

Yletyinen, K. (2025)

Moisture Safe Structures project – Updated design guidelines of structures 2024

Thitz, U. (2024)

Building Physical Properties of Natural Building Materials

Virkki, M. (2024)

The use of lightweight fill materials and phase change materials in building construction

Helander, M. (2024)

Moisture performance of sprung floors in indoor sports halls

Kallio, K. (2023)

The effects of switching off night-time ventilation on gas and particle content in schools and kindergartens

Ketko, J. (2023)

Effects of internal thermal insulation on the hygrothermal performance of massive brick walls

Karhunen, P. (2022)

Rapid U-value measurements for wall structures at testbuildings

Hietikko, J. (2022)

Building physics of structural solutions in traditional log buildings

Ruutiainen, I. (2022)

Building Physical Properties of Wood Shavings Insulation Materials

Tuurala, I. (2022)

Kylmän pihakannen lämpöliikkeiden simulointi COMSOL Multiphysics -ohjelmalla

Lahdes, J. (2022)

Slab-on-grounds moisture behavior and its effect on radon permeability

Ryhänen, T. (2022)

Air tightness of timber and wooden frame buildings

Matikainen, T. (2021)

Hygrothermal Performance of Sandwich-Panel-Renovated External Walls

Tiittanen, A. (2021)

Performance review of new energy-efficient construction method

Saarinen, P. (2021)

Hygrothermal Performance of cutter chip and sawdust insulations in the present and Future Climate

Forss, A. (2020)

Behavior of Capacitive Humidity Sensors in Monitoring the Drying of Concrete Walls and Calcium Sulphate Floors

Raunima, T. (2020)

Survey on the building physical risks related to energy performance class A apartment buildings

Koivukangas, M. (2020)

Hygrothermal Performance of an Insulated Brick Cavity Wall

Parkkinen, J. (2020)

Hygrothermal performance of timber-framed external wall junc- tions

Moisio, T. (2020)

Use of test buildings in building physical researches

Juusela, Ol. (2020)

Moisture Properties of Inner Shell and Hollow-Core Slab Concretes and Improvement of Measuring Methods

Tuominen, O. (2020)

Evaluating the in-situ measurability of U-value of different wall structures

Tuikka, J. (2019)

Drying of a construction moisture of a concrete slab with a drainage system based on a moisture collecting ductwork

Timlin, H. (2019)

Hygrothermal Performance of Timber-Framed External Walls with Gypsum Board Sheathing

Jokela, T. (2018)

Pressure differences over building envelope in new and renovated municipal service buildings

Kauppinen, A. (2018)

Pressure ratio management in service buildings with enhanced air tightness

Lahtinen, E. (2018)

Effect of heat and moisture conditions to concrete drying

Korkala, T. (2018)

The influence of uninsulated slab-on ground floor on the heating energy need of hall building

Rantala, J. (2018)

Drying examinations of prefabricabricated concrete walls insulated with cellular plastic

Korhonen, L. (2018)

Theses